Study Hub
ICC P1 Residential Plumbing Inspector Exam Prep Guides (IRC 2024)
Preparing for the ICC P1 residential plumbing inspector certification? The exam is 60 questions in 2 hours, open book, and the 2024 IRC is the only approved reference. These free, plain-language guides explain how the plumbing chapters fit together and walk through the calculations the exam leans on — drainage fixture units, drain and vent sizing, trap-to-vent distance, water supply demand and water heater relief valves — with worked examples and the exact section and table identifiers to look up.
CodeExam Prep is an independent study resource and is not affiliated with, endorsed by, or sponsored by the International Code Council (ICC). These guides are original educational material — they do not reproduce the IRC, do not provide real ICC exam questions, and cannot guarantee any exam result. Always confirm the code edition your exam and jurisdiction use, and verify requirements against the official 2024 IRC and any local amendments.
Getting started & exam strategy
How the ICC P1 exam is built, where each plumbing topic lives in the 2024 IRC, and the mistakes that cost candidates points.
The ICC P1 Exam: Structure, Content Areas, and How to Study for It
Format, the six content areas and their official weights, and a realistic study plan.
Read the guide →How to Find a Plumbing Section Fast in the 2024 IRC (Chapter Map)
Where every P1 topic lives in IRC Chapters 25–32, and the water heater parts of Chapters 20 and 24.
Read the guide →Common P1 Mistakes: Wrong Code, Old Numbering, Exceptions, and Table Notes
Wrong code, 2021 vs 2024 numbering, skipped exceptions and table notes — and how to avoid them.
Read the guide →
Sanitary drainage, traps & vents
Drainage fixture units, pipe sizing for branches, stacks and the building drain, and how traps and vents fit together.
Drainage Fixture Units (d.f.u.) Explained, with Worked Examples
Count d.f.u. the way Table P3004.1 intends, including multiple-bath groups and the table notes.
Read the guide →Sizing Horizontal Branches, Stacks, and the Building Drain (IRC 2024)
Read the branch/stack and building-drain tables correctly, with slope and water-closet limits.
Read the guide →Trap-to-Vent Distance and Fixture Trap Sizes (Tables P3105.1 and P3201.7)
Trap arm limits, minimum trap sizes, crown vents and the one-diameter fall rule.
Read the guide →
Water supply & water heaters
Water supply fixture units, demand and manifold sizing, plus relief valves, discharge piping and pans for water heaters.
Water Supply Fixture Units, Demand, and Manifold Sizing (IRC 2024)
From fixtures to w.s.f.u. to gpm to manifold size, in one worked example.
Read the guide →Water Heater Relief Valves, Discharge Piping, and Pans (IRC 2024)
T&P settings, the discharge-pipe list in P2804.6.1, and when a pan is required.
Read the guide →
Ready to practice what you study?
Reading the code is half the work — the other half is answering questions under time pressure. Create a free account and start practicing 2024 IRC-based P1 questions with written explanations and code references.